REMOTE VEHICLE STARTER
INSTALL MANUAL
PAGE 21
Remote Transmitter Learn
STEP 1
- Within 3 seconds turn the ignition key to the “
ON
”
position three times leaving “
ON
” the third time.
NOTE:
STEP 3a (Default)
- While holding the Program Button, press and
release the
button on each of the remote
transmitters to be programmed.
STEP 3b (PadLoc/
- While holding the Program Button, press and
2nd Car)*
release the
button on each of the remote
transmitters to be programmed.
If the parking lights do not turn “ON”, release the Program Button and
turn the ignition to the “OFF” position, wait 5sec and repeat steps 1 & 2.
STEP 2
-
Press and hold the Program Button.
The park
lights will turn “
ON
” and the horn (optional) will
honk once.
Continue to hold the Program
Button
, the park lights will turn “
OFF
” and the
horn (optional) will honk 5 times quickly.
PadLoc
is a safety feature that “
LOCKS
” the remote transmitter. To
“
UNLOCK”
the remote transmitter the button must be
pressed simultaneously with the function chosen.
or
2nd Car
function allows the operation of two Ultra Start systems
(in two separate vehicles) with one remote transmitter.
Example: Press and release and simultaneously to remote start
.
NOTE:
Some features not available with PadLoc or 2nd car mode.
IMPORTANT! All remote transmitters not programmed at this time
will be erased from memory for security.
