Setting 1 Secure Valet Mode
(time required to set the system into Service Mode)
1) Secure Valet 1 Flash/Honk Hold the Program Button for 15 seconds
*2) Normal Valet 2 Flashes/Honks Hold the Program Button for 5 seconds
Press & Release the Program Button 1 Time
(Setting 1) confirmed 1 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 2 Parking Light/Trunk Output
(14 pin auxiliary connector pins 2&8)
1) 30 sec. Output 1 Flash/Honk On for 30 seconds when
is pressed
2) Negative Park Lights 2 Flashes/Honks Switches the Park Lights/Trunk Outputs
*3) Park Lights 3 Flashes/Honks 2 Flashes when
is pressed
Press & Release the Program Button 2 Times
(Setting 2) confirmed 2 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 3 Horn Honk Timing
(14 pin auxiliary connector pin 5)
1) 5 ms Pulse Output 1 Flash/Honk Short(Quiet) Horn Output Pulses
2) 15 ms Pulse Output 2 Flashes/Honks Long(Loud) Horn Output Pulses
*3) 10 ms Pulse Output 3 Flashes/Honks Normal(Medium) Horn Output Pulses
Press & Release the Program Button 3 Times
(Setting 3) confirmed 3 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 4
Button Operations
1) Trunk Release 1 Flash/Honk Button activates Trunk Release
2) Garage Door Interface 2 Flashes/Honks Button activates Garage Door Interface
*3) Car Finder 3 Flashes/Honks Button activates Car Finder Mode
Press & Release the Program Button 4 Time
(Setting 4) confirmed 4 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
Setting 5 Reservation Mode ( “M” units only)
1) Manual Reservation 1 Flash/Honk Activate Reservation Mode by pressing Button
*2) Auto Reservation 2 Flashes/Honks Activate Reservation Mode by pressing brake
Press & Release the Program Button 5 Time
(Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button
until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button
to proceed to the next step.
REMOTE VEHICLE STARTER
INSTALL MANUAL
PAGE 17
Menu 2- Additional Settings
Press and
Release the
button for
Menu 2
Ignition 3x
On/Off
On/Off On
Press and
Release the
Program
Button
Press and Release
the Program Button
# of Times for
Setting Chosen
Press and Hold
the Program Button
to Change Option
