Ultra electronics HYPERSPIKE HS-18 RAHD, Operation And Maintenance Manual, Page: 34 / 60

HyperSpike ® HS-18 RAHD Operation and Maintenance Manual
Copyright © Ultra Electronics USSI Columbia City, IN 46725 USA
90207A-MAN-HS18RAHD
REV C
29
Figure 39: Edit Tour Popup-D
After the system has sequentially executed each of the defined legs, it will return to the start
position and repeat the tour in a loop.
When finished editing, click on the “Save” button as
shown in Figure 36 to create the tour.
To begin a Tour, simply click on the play button (

)
to the right of the Tour name. To stop a
tour, click on the stop button (

).
Figure 40: Tour Start Button
5.12. Deadzones
The CCI allows the user to easily define physical locations where device functionality should be
restricted. For example, if an HS-18 RAHD was installed on a ship, a user can restrict the system
from playing high volume audio directly at the bridge. This feature is especially useful when training
new operators to use your HS-18 RAHD.
Note: The HS-18 RAHD is pre-programmed with four non-removable Deadzones designed to protect
cabling from becoming pinched during operation.
To create a Deadzone, click on the
“gear” Device Settings icon as shown in Figure 9.