Ultra electronics HYPERSPIKE HS-18 RAHD, Operation And Maintenance Manual, Page: 32 / 60

HyperSpike ® HS-18 RAHD Operation and Maintenance Manual
Copyright © Ultra Electronics USSI Columbia City, IN 46725 USA
90207A-MAN-HS18RAHD
REV C
27
Figure 36: Edit Tour Popup-A
Tours are defined in the following manner:

Start
This is the point where the tour begins. Regardless of the HS-18 RAHD
’s angular
position at the time it is commanded to begin a tour, it will always move to this position
before continuing. Once a RAHD reaches this start position, it will move on to the first
leg.

Legs
Tours are broken down into individual movements called legs. Each leg is defined by
a destination position. To set this destination, enter coordinates in the “Pan” and “Tilt”
fields. Angles can be defined in the following ways:
o
Absolute
The coordinates entered will be the destination position.
o
Relative
The destination position will be the sum of the entered coordinates and the
previous destination.
o
POI
A predefined POI can be selected as the destination position.
o
Delay
The RAHD does not move. Instead it remains stationary for the specified time.
Pre-recorded tracks can also be played during tours. If a track is setup using the volume
slider and file chooser on the right side of the window, the chosen track will begin playing at
the specified volume at the beginning of the leg.