Ultra electronics HYPERSPIKE HS-18 RAHD, Operation And Maintenance Manual, Page: 5 / 60

HyperSpike
®
HS-18 RAHD Operation and Maintenance Manual
Copyright © Ultra Electronics USSI Columbia City, IN 46725 USA
90207A-MAN-HS18RAHD
REV C
iii
SAFETY PRECAUTIONS
The HyperSpike
®
HS-18 RAHD uses high operating voltages and sound levels. The primary safety
risks are: 1) electrical shock and 2) hearing damage or loss. Only properly-trained personnel
should operate the HS-18 RAHD and abide by the critical safety warnings identified in this manual to
prevent injury or death during operation.
Additional Electrical Safety Measures
Following these basic safety measures will prevent dangerous or potentially deadly situations from
arising :

Inspect the power cable for damage before each use.

Keep the power cable away from heated surfaces.

Never remove the power cable from an outlet by pulling on the cord.

Never override any of the HS-18 RAHD
’s electrical safety features.
Sound Safety Measures
The National Institute for Occupational Safety and Health (NIOSH) recognizes 120 dB as the
threshold of pain for unprotected hearing. Operators should wear hearing protection and ensure
that personnel are not directly in front of the device, at close range, when the power is ON.
WARNING:
LIFE-THREATENING ELECTRIC SHOCK BY ELECTROCUTION.
100 - 250 VAC IS PRESENT WHEN ENERGIZED.
Always plug the unit into properly-grounded electrical outlets.
Never allow any part of the system to sit in pooled water, or to be immersed in water.
Do not operate the device if the power cable is pinched, frayed, or cut.
WARNING:
TEMPORARY OR PERMANENT HEARING DAMAGE MAY OCCUR.
HIGH LEVEL OF SOUND CAN BE EMITTED.
Always wear hearing protection according to OSHA’s hearing conservation program.
Operators must remain behind the HS-18 RAHD during operation.