Ultra electronics HYPERSPIKE HS-18 RAHD, Operation And Maintenance Manual, Page: 18 / 60

HyperSpike ® HS-18 RAHD Operation and Maintenance Manual
Copyright © Ultra Electronics USSI Columbia City, IN 46725 USA
90207A-MAN-HS18RAHD
REV C
13
5. Controls and Operations
The following subsections will guide you through the use of the HS-18
RAHD’s Command
and Control Interface (CCI). While all necessary user functions are readily accessible
through the CCI, if a user desires to write custom control software, a REST API is also
available (see Section 5.17.4).
Figure 9: Command and Control Home Page
Note: The CCI will control a variety of HyperSpike
®
products including the HS-18 RAHD
and HS-14 RAHD. In these instructions, many images display a unique device name of
“HS-14 RAHD”. The screens are identical for an HS-18 RAHD.
5.1. First Time Setup
When connecting to an HS-18
RAHD for the first time, the “Setup” popup window will be
presented. To configure the device, enter an identifying name for your HS-18 RAHD in the
Device Name field, a username in the Username field, and a password in the Password
and Confirm Password fields. The Command and Control Interface is configured to
operate with only one user account. If desired, the password can be changed at a later time.
Unique Device Name
Angle Indicators
Camera Options
Searchlight Options