![background image](http://html1.mh-extra.com/html/ultra-beam/ub20/ub20_manual_3390277003.webp)
WiMo Antennen und Elektronik GmbH
Am Gäxwald 14, D-76863 Herxheim Tel. (07276) 96680 FAX 9668-11
http://www.wimo.com e-mail: [email protected]
3
PVC GUIDE TUBES DRIVER 30-40
All UltraBeam models working in 30 and 40 meters with folded elements include
the installation of internal guide pvc tubes to the left and right elements attached to the motor unit.
The guide tube of folded elements is essential to allow the tape to slide within the
curve and the side elements without bending.
The guide element is composed of two sections of PVC pipe (2 x 1500) with a total length of
3 meters. Connect the two sections with PVC joining and common insulating tape.
Insert a second junction to one of the two ends, this will subsequently be used to
attach the guide tube to the motor unit (Fig.1-2)
Fig.1
Fig.2
Fig.3
Insert the guide tube into the previously prepared the element (Figure 3)
telescopic element
PVC
MOTOR
Internal PVC guide tube
junction
tape
tape
junction
tape