![background image](http://html1.mh-extra.com/html/m2-antenna-systems/1700-26-2/1700-26-2_assembly-instructions_3123564001.webp)
M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722
Tel: (559) 432
-
8873 Fax: (559) 432
-
3059 Web: www.m2inc.com
©2018 M2 Antenna Systems Incorporated
6/7/2018
REV A
Model
.........................................
1700
-
26
-
2
Frequency Range
.......................
1625
-
1725 MHz Cont.
*
Gain
..........................................
18.3 dBi Typical Average
Front to back
..............................
27 dB Typical Average
Beamwidth /26 ele
.....................
E=21°/H=22°
Beamwidth /35 ele
......................
E=17°/H=18°
Feed Impedance.
.......................
50 Ohms Unbalanced
Maximum VSWR
........................
>1.5:1 AVG.
Mounting Polarity
.......................
Horizontal or Vertical
Input Connector
..........................
TNC Female
Power Handling
..........................
250 Watts
Boom Length / Dia.
.....................
57” / 1/2”
Wind area / Survival
...................
0.3 Sq. Ft. / 80 MPH
Weight / Ship Wt.
........................
2 lbs. / 10 lbs.
M2 Antenna Systems, Inc.
Model No: 1700
-
26
-
2
FEATURES:
The 1700
-
26
-
2 is a rugged man packable high gain yagi type, horn fed antenna that can provide high perfor-
mance between the frequencies of 1625 MHz and 1725 MHz. The elements are made from aluminum 1/4” hex and are
large enough not to be damaged by man packing or the outside elements. The antenna is broken apart in near equal sec-
tions using a unique no tools bayonet type connection that allows quick assembly or disassembly. The antenna can be
used with just 2 element sections in place, that keeps the package down to a manageable 57 inches long. But if extra
gain is needed, just add the last element section for a little extra gain for the fringe situations. The 1700
-
26
-
2 uses a
unique horn to excite the elements and achieve amazing gain. The horn comes with a face cover to protect the horn
probe inside and gives a clean storage cup after disassembly.
SPECIFICATIONS:
*Subtract 2.14 from dBi for dBd