19
This program is only suitable for charging Pb (lead-acid) battery with nominal voltage from 2 to 20V. Pb
(lead-acid) battery is completely different from NiCd / NiMH battery. These batteries can only deliver
current lower in comparison to their capacity. The same restriction applies to the charging process.
Consequently, the optimum charge current can only be 1/10 of the capacity. Pb battery can not be used
for fast-charging, please follow the instructions provided by the battery manufacturer. You can press
“ Start / Enter ” key to make it blink and alter the value of parameters using ” INC ”or “ DEC”key, press
“Start/Enter” key to store the value.
You can set up sequence on the left and the number of cycles on the right.You
can balance,refresh and bread-in the battery with this function.You can set a
temporary cool-off procedure in the use's setting.
Press”Batt.type/Stop”key to stop program,you can press ”Start/Enter” key to
alter charge current.The sound indicates the end of program.
When it approaches to the end,you can see the capacity of the battery being
charged or discharged.You can press”INC ”or” DEC”key to display result
of each cycle.
GHARGER PRO-8
Summary of Contents for GHARGER PRO-8
Page 1: ...GHARGER PRO 8...
