15
This function is for balancing the voltage of Lithium-polymer battery cells while charging.In the balance
mode, the battery needs to have a balance lead to connect to the individual port at the right side of the
charger.And you need to connect the battery's output plug to the output of charger.
Charging in this mode is different from the normal modes,because the built-in processor monitors voltage
of individual cell and control input current fed into each cell to normalize the voltage.
The value on the left side of the second lines sets the charge current. The value on
the right side of the second lines sets the battery pack's voltage.After setting current
and voltage,press”Start/Enter” for more than 3 seconds to start the process.
This displays the number of cells you set up and the processsor detects. "R"shows
the number of cells detected by the charger and"S"is the number of cells set by you
at the previous screen.If both numbers are identical you can start charging by press
“Start/Enter” button.If not,press”Batt./Stop” button to go back to previous screen to
carefully check the number of cells of the battery pack before going ahead.
This screen shows the real-time status during charge process.Press”Batt./Stop”key
once to stop the charge process.
The left side of the first line shows the type of battery you choose. The value on the left
of the second line of the charger is current user set.After setting the current and voltage,
press”Start/Enter”key for more than 3 seconds to start the process.(charge current:0.1-
8.0A,voltage:1-5V)
This displays the number of cells you set up and the processsor detects. "R" shows the
number of cells detected by the charger and "S "is the number of cells set by you at the
previous screen. If both numbers are identical you can start charging by press"Start/
Enter” button. If not,press ”Batt./stop” button to go back to previous screen to carefully
check the number of cells of the battery pack before going ahead.
This screen shows the real-time status during charge process. Press “Batt./Stop” key
once to stop the charge process.
GHARGER PRO-8
Summary of Contents for GHARGER PRO-8
Page 1: ...GHARGER PRO 8...
