17
The value of discharge current on the left can not exceed 1C, and the value on
the right can not be under the voltage recommended by the manufacturer to
avoid deep discharging. Press ” Start/Enter” for more than 3 seconds to start
charging.
This shows the real-time status of discharging,you can press”Batt.Type/Stop”
key to stop discharging.
The processor monitors voltage of each cell when the battery packs are during its " storage " and
"discharging"process. To achieve this feature, plug each battery to the charger individually. If voltage of
any cell is abnormal,
Charger
Pro
-
8
will show error message and terminate the program forcibly. So if
there is battery damage or disconnection,you can see the error message and press” INC
?
” to know which
cell is damaged.
The processor detects voltage of one cell is too low.
At this screen, you can set up the current and voltage of the battery pack.
Charging and discharging will make the batteries come to the voltage level
of"storage"state.
This screen shows the real-time status charging.Press”Batt. type/Stop”key
once to stop the charge process.
GHARGER PRO-8
Summary of Contents for GHARGER PRO-8
Page 1: ...GHARGER PRO 8...
