16
This function is for charging/discharging batteries which are not used at once.This program is designed
for charging or discharging of batteries of specific original state.They are classified by types:3.75V LiIo,
3.85V LiPo and 3.3V LiFe.The program will begin to discharge if the original state of the battery exceeds
the voltage level of storage.
Charging current will become lower when it progress to the end of charging.
A specific CV process will be reduced to end the charging process earlier.In
fact,the charging current will goes to 1/5 when the charging process comes
to 1/10. Charging capacity will be a little smaller than normal charging, but
charging time will be shortened accordingly.
You can set up the charging current and voltage of the battery pack. Press
“Start/Enter” key to display voltage confirmation. Then press ”Start/Enter”
key again to confirm and begin to charge.
This screen shows the real-time status of"fast charging".Press “Batt.Type/
Stop” key once to stop the charge process.
GHARGER PRO-8
Summary of Contents for GHARGER PRO-8
Page 1: ...GHARGER PRO 8...
