background image

21 

GB/MT

Introduction / Safety  notes

Hydraulic trolley jack

 Introduction

These operating instructions form a 
part of this product. Make yourself 
familiar with all the operating instruc-

tions and safety advice for the product before 
use. Use the product only as described and for 
the indicated purpose. If you pass the product 
on to anyone else, please ensure that you also 
pass on all the documentation with it.

 Proper use

The hydraulic vehicle jack is intended for raising 
and lowering motor vehicles. Other uses or 
modification of the hydraulic vehicle jack shall 
be considered as improper use and may lead 
to injury or damage. The manufacturer will not 
accept liability for loss or damage arising from 
improper use. The product is not intended for 
commercial use.

Note:

 Reclose the release 

5

 valve after each 

use!

  Description of parts

1

 Lifting handle

2

 Lifting arm

3

 Support plate

4

 Carrying handle

5

 Release valve

6

  Lifting handle socket

7

 Cover

8

 Relief valve

9

 Adapter

10

 Hex bolt

11

 Nut

  

Technical data

Stroke:  

135–342 

mm

 

150–357 mm (with adapter )

Maximum load:  2000 kg
Hydraulic oil  
grade: SAE 

10

Hydraulic oil  
quantity: 115 

ml

Maximum 
force on lever: 

350 N

 Included items

1 hydraulic car jack 
1 adapter
1 pump lever
1 operating instructions

Safety notes

  

DANGER!

 Follow the instructions below to 

avoid the threat of loss of life, injury, or 
damage to the product etc.

   

Always use axle stands and wheel chocks 
in addition to your hydraulic vehicle jack. 

Never

 work under a raised vehicle unless 

you have taken additional safety precautions. 
This is intended to prevent the vehicle from roll-
ing away, sliding off or overturning the jack. 

   

Use the product on a solid, level surface 
only. Using the product on an unstable or 
uneven surface – such as a gravel surface – 
may lead to the load slipping. 

   

2000 

kg

Ensure that you never exceed the 
allowable (rated) load capacity.

   

The person operating the jack must observe 
the jack and the load during all movements. 

   

Never

 work under the raised load if it has 

not been made secure by suitable means.

   

Do 

not 

allow the hydraulic vehicle jack to 

be used by uninstructed or inexperienced 
persons. 

Summary of Contents for Z31071































Reviews: