GUARANTEE.
This CLARKE product is guaranteed against faulty manufacture for a period of 12 months
from the date of purchase. Please keep your receipt which will be required as proof of
purchase.
This guarantee is invalid if the product is found to have been abused in any way, or not used
for the purpose for which it was intended. Faulty goods should be returned to their place of
purchase, no product can be returned to us without prior permission.
This guarantee does not effect your statutory rights.
HYDRAULIC TROLLEY JACK
0709
Model Nos. CTJ2000G, CTJ2000GA, CTJ2QLG, CTJ2250LS, CTJ3QLG & CTJ3000LS
Thank you for purchasing this Clarke Trolley Jack.
Before attempting to use the unit, please read this instruction booklet thoroughly, and follow
all directions carefully, paying particular attention to the safety precautions. By doing so, you
will ensure the safe operation of the unit, and the safety of yourself and others around you.
You can then look forward to long and reliable service from your CLARKE Trolley Jack.
PROBLEM
PROBABLE CAUSE
REMEDY
Jack will not lift
Oil level low
Top up oil
to full height
Jack will not hold .
1 Release valve not closing
1 Turn handle fully clockwise
the load
2 Pump valves not seating
2 Consult your CLARKE dealer
3 Air in ram
3 Purge air (see below)
Arm will not lower
1 Broken return Spring
1 Replace (See your dealer)
2 Lift arm linkage bent or
2 Consult your CLARKE dealer
binding
3 Cylinder ram binding
3 Consult your CLARKE dealer
4 Parts Worn
4 Consult your CLARKE dealer
Jack feels spongy when
Air in system
Purge air (see System Air Purge)
lifting
SPECIFICATIONS
CTJ2000G
CTJ2QLG
CTJ2250LS
CTJ3QLG CTJ3000LS
CTJ2000GA
Maximum load (tonnes)
2
2
2.25
3
3
Min. Saddle Height (mm)
120
150
110
150
115
Maximum Height (mm)
190
500
525
500
525
Overall Length (mm)
645
633
727
685
727
Overall Width (mm)
345
345
395
350
395
Weight (kg/lbs)
38.5/85
37/81
45.5/100
42/92.5
48/108
Part No.
1600650
7621815
7621015
7621005
7621020
7621010
SPARE PARTS
The following user serviceable parts are available from your Clarke dealer, or Clarke
International Parts Dept.
1. Saddle
2. Castor Assembly
3. Front Wheel Assembly
4. Valve Operating Lever
FAULT FINDING
For Spare Parts and Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
l
SYSTEM AIR PURGE
1.
Turn handle ONE full turn anticlockwise and pump handle EIGHT full strokes.
2.
Turn handle clockwise FULLY, and pump handle to maximum height...then continue to
pump 5 or 6 times to remove trapped air.
3.
Turn handle anticlockwise and allow arm to lower and ram to fully retract.
4.
Turn handle clockwise FULLY, and pump handle to maximum height to test pump action.
NOTE: It may be necessary to perform the above action more than once to ensure that air is
totally evacuated.
