Injectors
How to check if the injectors work
•
Use the ULP injector trouble shooting kit (T080002) (shown right)
•
For safety reasons : disconnect both connectors from the coils
•
Disconnect a connector from the injector on cylinder 1.
•
Connect the trouble shooting kit
•
Master ON and ECU ON (NOTE ENGINE IS LIVE)
•
Keep the additional injector close to your ear.
•
Engage the starter of the engine
•
Listen to hear “click – click – click”
•
If no : it means that there is no signal coming from the
ECU
or damaged
cable/loom – try another injector…
•
If yes : there is a signal coming from the ECU.
•
The installed injector is possibly blocked and may have to be replaced.
If you have been through all of the above steps and still cannot identify the issue, contact your ULPower dealer .
