Ignition cables
Check the ignition cables and connections
•
Make sure that both connectors (coil side and spark
plug side) are installed i.a.w. the installation manual. If
not installed properly, no contact or an incorrect contact
may occur.
•
To check if the connectors are installed properly, pull
fairly hard on both ends of the ignition cable.(coil side +
sparkplug side). The connectors will remain in place if
installed correctly. If they break free – REMAKE THE
CONNECTION
•
Check if both connectors from the wiring loom are well
connected/seated to the coil
•
For 4 cylinder engines (260 and 350 series) make sure
that the supplied aluminium coil bracket is installed.
(Omitting the coil bracket may result in a deformed coil
with loss of contact inside the coil.)
4 cylinder coils require the aluminium
brackets for correct operation
