Spark plugs
How to check the spark at the plugs
•
For safety reasons: always disconnect the fuel pump before running this test
•
For both coils : put switch TO ON
Method 1:
•
Remove 1 sparkplug and hold the spark to the “ground” (or use a new spark plug)
•
Engage starter engine
•
Check if there is a spark. CAUTION HIGH VOLTAGE!
NOTE: You may not see the spark in bright sunlight (shield it for better visibility)
Method 2 (preferred method)
•
Install a ‘HT ignition lead spark tester’ unit between the boot and the spark plug
(you may install 4 to see all at once)
ACTION?
•
If there is
NO
spark, go to
COILS
If there
IS
a spark, go to
INJECTORS
