Ulma TFS100, Manual, Page: 6 / 85

-1- SAFETY DEVICES
COMUN0001_EN-04 2/9
1 INTRODUCTION
This section in the Manual was included for the user to become familiarized with the
safety measures to follow when using the machine.
2 GENERAL SAFETY PRECAUTIONS
Do not handle, install, adjust or start-up this machine without first reading the content of
this manual.
Although the machine includes the systems that are needed to ensure the safety of the
user, special care should be taken in handling, setting and maintenance operations.
When unpacking the machine, carefully inspect for any damages that may have
occurred during transportation. If any problems are found please notify the
transportation company so that your agent may make a proper evaluation.
Maintenance and servicing should only be done by qualified and properly trained
personnel.
This machine is designed to package the product indicated in the sales contract that
was signed by the client. Should any other type of product need to be packaged,
please check with ULMA.
ULMA is not responsible for any alterations or adaptations made on the machine by
personnel other than ULMA, unless previously authorized in writing.
The use of spare parts and consumable items that are not manufactured by ULMA may
have a negative effect on the functioning of our equipment, and may be a cause for
cancelling the guarantee.
3 PERSONNEL SAFETY
Machine operating and maintenance personnel must be aware that safety procedures
are included as a part of their work. Accident prevention must be one of the main
objectives in their work.
Know and respect the machine. Read and follow safety procedures and make sure that
everyone working with the machine understand and use these procedures.
Do not use neckties, handkerchiefs, loose dresses, necklaces, loose fitting clothing,
etc. near a moving machine. Protect long hair with a cap or hair net.
Use the Personal Protective Equipment required for the work to be performed and keep
this equipment in good condition.
THE SAFETY OF THE PERSONNEL INVOLVED IN HANDLING
INDUSTRIAL EQUIPMENT IS ONLY POSSIBLE WITH A PROPERLY
DESIGNED SAFETY PROGRAM, WHICH SHOULD BE STRICTLY
FOLLOWED BY THE USERS OF THE EQUIPMENT.