HE.17532_F © 07/2016
5
AHP700LUIS
GB
Instruction Manual Battery-hydraulic Pump
authorised
copy
3.4 Description of crimping cycles
A pressing procedure will be initiated by actuating the trigger. The pressing process is de
fi
ned by the closing motion
of the pressing jaws. The rollers on top of the ram close the pressing jaws scissors like.
Attention
For information concerning the suitability of the tool with regard to dimension and
fi
eld of application (gas/
water/heating etc.), please refer to the documentation of your system manufacturer.
Attention
The user has to check by optical means whether the pressing jaws are completely closed.
Attention
If a pressing cycle has been interrupted the
fi
tting has to be either dismantled or pressed a second time.
Attention
Do not operate the tool without jaws.
4. Remarks in respect of the determined use
The pump can be transported and operated in any position.
4.1 Operation of the unit
1. The female coupling of the hydraulic hose HSOEL2 (pic. 25.4) must be connected to the male coupling (pic. 1.5) of
the pump (pic. 16).
2. Select the right working unit for the intended application.
3. The selected working unit will be connected via the hydraulic hose HSOEL2 (pic. 25.4) with the pump (pic. 16)
Attention
Do not operate the pump without a working unit.
Attention
Before starting to operate the pump the oil level must be checked and possibly adjusted. (pic. 13 - 15).
press
function
