11
In the operation of the robotic arm system, we must ensure the safety of the operators first.
The general precautions are listed in the table below. Please take appropriate measures to
ensure the safety of operators.
1.Each operator who uses the robotic arm system should be trained through a training
course hosted by UFACTORY (Shenzhen) Technology Co., Ltd. Users should fully understand
the standardized operating procedures with the robotic arm, and the solution to the robotic
arm running error.
2.When the device is running, even if the robotic arm seems to stop, it is possible that the
robotic arm is waiting for the signal and in the upcoming action status. Even in such a state,
it should be considered as the robotic arm is in action.
3.A line should be drawn to mark the range of motion of the robotic arm to let the operator
acknowledge the robotic arm, including its end tools, (such as gripper and suction cup, etc)
operating range.
4.Check the robotic arm regularly to prevent loosening of the bolts that may cause undesir-
able consequences.
5.Be careful when the robotic arm is running too fast.
6.Be careful about dropping items that can be caused by accidental power off or unstable
clamping of the robotic arm.
7.xArm has no collision detection function, please make sure there are no obstacles in the
operation of the robotic arm.
1.5.3.Operator Safety
CAUTION