UEi PowerDAQ PDXI-AO Series, User Manual

Page: 50 / 69

Chapter 5: Interconnections
42
Figure 11: Configuring the PD2-AO-STP with PDXI-AO-8[16][32]
PDXI Analog Output Board
(8/ 1 6/32 Channels)
Channels 0- 1 5 and digital lines
Channels 1 6-3 1
PD-AO-STP-32
Screw Terminal
IRQx and
TMRx
termination
jumpers
Local
/Remote
Sense
jumpers
AOUTx
SNSx
AOUTx – channel x output
SNSx – channel x sense line
or AGND (see jumpers JP 1 -
JP32 settings)
To the servo-
motors, etc.
To/from
Digital
sensors
PDXI-CBL-AO
Sense-to-Out jumpers. JP0.15 jumpers should be
installed only if jumpers on J6 jumper pattern on
PDXI-AO board in 2-3 positions. JP16..31 should
NEVER be installed.
See PD2-AO-8[ 1 6][32] connection for the details.
J6
J8