UEi PowerDAQ PDXI-AO Series, User Manual

Page: 19 / 69

Chapter 2: Installation and Configuration
11
To access the PowerDAQ control panel, select
START
>
Settings
>
Control Panel
and the PowerDAQ icon will be
displayed.
Figure 1: PowerDAQ Control Panel Application
An alternative test is to use the SimpleTest program installed
by the Software Suite. Attached a oscilloscope of multimeter
to the outputs of the AO board. Run the
SimpleTest.exe
program by selecting
START
>
Programs > PowerDAQ >
Delphi Acquisition Demo
. This program shows all
information about the board(s) installed and allows you to
test all subsystems available on the board selected for the
test.