48
FIELD ENTRY LIST FOR VALVES
Test Results selection: LEK/NE/NIS/OK/CHK
TYPE selection: GTE/BLL/BFY/NE/OTH
NOTE:
If Storage Display is selected the ABCD Screen will not be However, the
Parameters Information function can be used to input of test results as described above.
BEARINGS
To view Bearings Info, click the Sensitivity Dial and move the cursor to the bottom of
the Display Panel until “Press ENTER For” is blinking. Spin to Bearings Info and press
Enter.
To enter a test condition:
Spin to Test Results: the condition default is OK and will blink slowly. If it is
necessary to change:
Click with the Sensitivity Dial and the condition (OK) will blink rapidly.
Spin to select a condition indication. The choices are; OK, INP, NE, BAD, LUB.
To Set, Click the Sensitivity Dial (the condition will blink
slowly)
Spin to Temperature should a Temperature entry be
desired.
Click on the Temperature setting (it will blink rapidly)
For example, if you are looking to enter a reading of
250; Spin to the left to select the value of “200” and to
the Right to select the value of 50).
Click to set
Press Enter to store the information and Spin to EXIT
and click to exit.
FIELD ENTRY LIST FOR BEARINGS
Test Results: OK/INP/NE/BAD/LUB
RPM: 00001-99999 Type: NE (can be modified)
