36
MENU 16: RESTORE LISTS
Selecting Restore Lists resets inspection codes to original factory set codes listed in
Ultratrend DMS and in the Ultraprobe 10,000. This change will affect only the current
information stored locally on the Ultraprobe and can be changed again when downloaded
to Ultratrend DMS. YES, will restore the lists to the original factory lists, NO will retain
current codes.
Follow the steps to enter the Setup Mode as described earlier.
to Menu 16: Restore Lists.
Click to Enter.
Spin Spin to YES or NO.
Click to set.
Press the Yellow ENTER button to exit.
MENU 17: SET SHUTOFF MODE
SHUTDOWN = TIMED TRIGGER
There are two selections to control how to turn the
instrument off: Either by a Timed turn-off (as in
Menu 16) or when the trigger is released: Trigger.
In Trigger Mode, when the trigger is pressed to turn
the Ultraprobe on, the instrument will stay on until
the trigger is pulled a second time.
TO SET THE SHUTOFF MODE
Follow steps to enter the Setup Mode as
described above.
Spin to Menu 17: Set Shutoff Mode
Click to Enter
Spin to “Timed” or “Trigger”
Click to set
Press the Yellow ENTER button to exit.
