19
indicator is selected, or “active”, it will blink. When the
cursor is moved to the Decibel Indicator
and the Decibel Indicator is blinking, it may be spun (rotated) clockwise or counter clockwise to
adjust the sensitivity/volume of the instrument. When the cursor is moved to the Frequency
Indicator and the Frequency Indicator is blinking, the Sensitivity Control Dial may be spun to
change the frequency. The Storage Location (Record Number) can be changed up or down when it
is blinking by spinning the Sensitivity Control Dial. When blinking, the Function Selection, located
on the bottom of the screen can be changed by spinning the Sensitivity Control Dial up or down to
select a specific feature which may be entered by pressing the Yellow Enter Button.
NOTE:
If a storage location has been used during a test run, it will be highlighted in black with
white letters as shown:
On the bottom line of the Display Panel, you will find the
Function Select Indicator: “Press
Enter for:” (you c
an use this to enter any of the following function fields).
The default function fields are:
EXIT MAIN
: Exits to main display.
EDIT TEXT
: When on text notations can be set using up to 16 alphanumeric characters.
MORE
: View additional test information including Date, Time and Module used.
PARAM INFO
: View or change inspection details. It can also be set in the Applications
Select menu for specific application information such as Leak Info, Bearing Info, Steam Info,
Electric Info, Valve Info)
RECORD WAV
: The Ultraprobe 10000 is configured to record heterodyned ultrasounds with
this function setting.
SD INFO
: Information of stored record and WAV files can be viewed here.
STORE REC
: Use this function to store inspection data. This is a quick way to data log if
inspection data is to be saved without viewing previously stored data (as in Storage Display).
Storage Location
(Record Number)
Current Frequency
reading
Function selection
Current dB reading
