29
23
BEEPER function:
Phantom POWER:
Audio IN.
VOX function:
PreVOX time (format: XXX):
000
010
120
PostVOX time (format: XXX):
000
010
120
VOX Level (format: X.X):
:
1.1
2.7
3.3
Output Volume (format: XXX):
:
025
080
128
Output Bass (Gain):
+0dB
+15dB
Output Bass (Cut-off Frequency):
20Hz
150Hz
Activate the acoustic buzzer.
OFF (as Factory Default).
ON
Enable the 12V phantom power on MIC input line.
OFF (as Factory Default).
+12VDC.
Select which audio source will be used in "streaming" mode of the two possible ones:
MIC Type (as Factory Default).
LINE Type.
Allows the function of "streaming" is activated by the VOX controlled method, activate the equipment to detect an audio
signal.
OFF (as Factory Default).
ON
Select between 000 and 120 seconds, the time it will spend in the detected signal condition before being made the audio
"streaming" activation call.Always use a 3-digit format.
Example:
Select between 000 and 120 seconds, the time it will spend in the no-signal condition before being canceled the audio
"streaming" call.
Always use a 3-digit format.
Example:
Selects the minimum threshold for detecting the audio signal as active.
Always use a 3-digit format (minimum 1.0V, maximum 3.3V).
Example
Select between 025 and 128, the volume applied to the output which you connect the amplifier.
Always use a 3-digit format.
Example
(mín.)
(max.)
Filter can be used to supplement the low frequency response, from +0dB (default set) to +15dB.
Example:
(mín.)
(max.)
Filter cut-off frequency for supplement low frequency response.
Example:
(mín.)
(max.)
5.- DEVICE CONFIGURATION (WEBSERVER)
610.440A
Installation - Configuration - Use - IPU-1025
IPU-1025
Options ONLY VALID when SPEAKER (Recever) mode is active.
Rev. 1