29
24
Output Treble (Gain):
-12dB
+0dB
+10.5dB
Output Treble (Cut-off Frequency):
1kHz
8kHz
MIC IN Volume (format: XXX):
080
090
128
LINE IN Volume (format: XXX):
005
050
128
DESK.MIC IN Volume (format: XXX):
070
090
127
EXT.MIC IN Volume (format: XXX):
010
090
128
TM OUT Activation Mode:
OFF
ON, voice calls
ON, all calls:
Filter can be used to attenuate/supplement the high frequency response, from -12dB to +10.5dB.
Example:
(max. atenuation)
(default)
(max. gain)
Filter cut-off frequency for attenuate/supplement high frequency response.
Example:
(mín.)
(max)
Select between 088 and 128, the gain level to be applied to microphone connected to IPU-1025.
Always use a 3-digit format.
Example:
(mín.)
(max.)
Example:
(mín.)
(max.)
Select between 070 and 127, the gain level to be applied to audio from the desk control IPU-100P connected to the IPU-1025.
This configuration parameter can only be used in IPU-100P mode.
Always use a 3-digit format.
Example:
(mín.)
(max.)
Select between 010 and 128, the gain level to be applied to audio from the external microphone of the desk control (IPU-100P)
connected to the IPU-1025 (CM-23 is the recommended microphone). This configuration parameter can only be used in IPU-
100P mode.
Always use a 3-digit format.
Example:
(mín.)
(max.)
There are few input calls (depending on the extension) that allow the activation of this mode:
:
: Any incoming call with the server specifications will activate the TM OUT.
Only incoming calls from desk control (IPU-100P), will activate the TM OUT.
Select between 005 and 128, the gain level to be applied to the signal line connected to the IPU-1025.
Always use a 3-digit format.
SERVER SPECIFICATIONS
(2500 - 2999)
(4000 - 4999)
Codifier extension in the range
and
activate the TM OUT in the decoder.
5.- DEVICE CONFIGURATION (WEBSERVER)
610.440A
Installation - Configuration - Use - IPU-1025
IPU-1025
Options ONLY VALID when SPEAKER (Recever) mode is active.
Rev. 1
