UCONNECT INTERNATIONAL 4C NAV, Manual, Page: 45 / 204

Controlling The Auxiliary Device
The control of the auxiliary device (e.g., selecting playlists,
play, fast forward, etc.) cannot be provided by the radio;
use the device controls instead. Adjust the volume with the
VOLUME And ON/OFF rotary knob, or with the volume
of the attached device.
NOTE: The radio unit is acting as the amplifier for audio
output from the Auxiliary device. Therefore, if the volume
control on the Auxiliary device is set too low, there will be
insufficient audio signal for the radio unit to play the music
on the device.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: AUX.
Audio
Refer to Radio Mode for adjusting the audio settings.
BLUETOOTH MODE
Overview
Bluetooth Streaming Audio (BTSA) or Bluetooth Mode is
entered by pairing a Bluetooth device, containing music, to
the Uconnect System.
Before proceeding, the Bluetooth device must be paired to
the Uconnect Phone to communicate with the Uconnect
System.
NOTE: See the pairing procedure in the Uconnect Phone
section for more details.
To access Bluetooth mode, press the “Bluetooth” button on
the left side of the display.
Seek Up /Down
Press and release the “Right Arrow” button on the
touchscreen for the next selection on the Bluetooth
device. Press and release the “Left Arrow”
button on
the touchscreen to return to the beginning of the current
selection, or return to the beginning of the previous
selection if the Bluetooth device is within the first
second of the current selection.
Media Mode
Press the “Media” button on the touchscreen to select the
desired audio source: Bluetooth.
Tracks
If the Bluetooth device supports this feature, press the
“trks” button on the touchscreen to display a pop up with
4
MEDIA MODE 45