13
22
Installation
Install Metal Mounting Bracket
• Identify a position on the helmet to adhere the Metal Mounting Bracket. Prior
to attaching metal bracket, helmet surface should be cleaned, preferably with
rubbing alcohol.
• Peel off the double sided tape protective film.
• Carefully place the Metal Mounting Bracket onto the position identified in step 1.
(You may only do this step once)
• Make sure that permanent metal mounting clip is installed showing the UCLEAR
Logo right side up with the 2 side holes at the top and the metal prong pointing
down.
• Apply slight pressure onto the metal mounting bracket to
ensure that the metal mounting bracket is firmly secured.
Intercom Operations
Large Group Intercom (Three parties or more)
Start Intercom
•To start/connect the intercom, hold the Up button for 2 seconds.
•All the devices will be chained up automatically, in the same sequence same as
performed during the pairing process.
Stop Intercom
•To stop the intercom, hold the Down button for 2 seconds.
All the devices in the chain will be disconnected automatically.
EN
EN
