Uclear HBC220 SNOW User Manual Download Page 18

Mobile Phone Operations

Last Number Redial

•To redial the last number, hold the Up and Answer buttons for 2 seconds. The capability of 

  this function is dependent on the mobile phone used.

3 way calling

•Whilst on a call, if an incoming call comes in, you may answer the call by pressing the 

  Answer button once. 

•To swap between 2 concurrent calls, press the Answer button once.

•To end a call during a 3 way call, holding the Answer button for 2 seconds would end the 

  active call. Upon terminating the active call, the call on hold would automatically be the 

  active call.

Music feature

•If the mobile phone supports A2DP/AVRCP profile, user may activate the music by playing 

  it directly from the phone or by controlling the music via the helmet communicator. To 

  operate refer to Music Streaming Operations section. Should the documented steps not 

  work, refer to the phone user manual on how to activate the A2DP/AVRCP feature.

17

18

Music Streaming Operations

To use the helmet communicator with your music devices you must connect 

them wirelessly through Bluetooth pairing. This step is only required for Bluetooth 

music streaming devices.

Pairing

• To connect the helmet communicator to a Bluetooth music device, turn power on,

  hold the Up and Down buttons for 2 seconds. This puts the helmet communicator

  into pairing mode. The status indicator will blink blue and red alternately.

• Next, put the Bluetooth music device into pairing mode. Both the helmet 

  communicator and the music device should automatically pair together. 

After pairing the helmet communicator to a music device, you may use the helmet 

communicator to wirelessly listen to music stored on the device. 

In order to use the helmet communicator to remotely control the music, the music 

device must have Bluetooth Audio/Video Remote Control capability,  AVRCP profile.

Play 

• To play music, press the Answer button 2 times. 

Stop

• To stop music, press the Answer button 1 time. 

Fast Forward

• To skip to the next track, press the Up button 2 times.

Backtrack

• To skip to previous track, press the Down button 2 times.

EN

EN

Summary of Contents for HBC220 SNOW



















Reviews: