background image

26 | SWIFT K33A ALL IN ONE FUSION SPLICER

americanilsintech.com | 27

The Home screen is displayed as below. The user must choose the correct splice mode, 

heater mode and stripper mode specifi c to the fi ber type, shrink sleeve fi ber size to ensure 

an accurate splicing result. The basic information of the Swift K33A is displayed on the 

initial page. Before splice, make sure the appropriate mode is selected.

SUPPLYING POWER TO THE SWIFT K33A

It is strongly recommended to use the AC adapter (F1-1) and battery (K3360) provided with 

package. Using a battery other than provided may cause fumes, fi re, and damage to the 

device, personal injury and death.

INSERT & DETACH BATTERY

Insert the battery into the battery groove until it clicks. Remove the Battery by pressing 

the battery release button and slide it out.

K33A OPERATION

Battery Status Indicator

Current Splice Mode Display

Current Heater Mode Display

Battery

The unit be powered off before removing the battery to avoid damage. Remove the 

battery by releasing lock lever.

Battery

Lock Lever

Battery Pack Status Display

Summary of Contents for ILSINTECH K33A


















































Reviews: