Ublox NINA-B3 Series, System Integration Manual

Page: 49 / 72

NINA-B3 series - System integration manual
UBX-17056748 - R13 Regulatory information and requirements Page 49 of 72
C1-Public
5.2 FCC/ISED – US/Canadian markets
5.2.1 Compliance statements
The NINA-B3 series modules comply with Part 15 of the FCC Rules and with Industry Canada license-
exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that the
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to correct the interference using either one or more of the following
measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
⚠
Since u-blox cannot control how integrators of NINA-B30 will operate the module, an extra
precaution is required by the FCC/ISED. NINA-B30 customers are
required to undergo a ’Change
in ID’ process . See also Change in ID/Multiple Listing process ..
⚠
The NINA-B3 modules are for OEM integrations only. The end product has to be professionally
installed in such a manner that only the authorized antennas can be used. See also
Antenna
selection .
⚠
Any changes to hardware, hosts or co-location configuration may require new radiated emission
and SAR evaluation and/or testing. Any changes or modifications NOT explicitly APPROVED by
u-blox may cause the NINA-B3 module to cease to comply with the FCC rules part 15 thus void the
user’s authority to operate the equipment on the US market.
Model FCC ID ISED certification number
NINA-B301 XPYNINAB30 8595A-NINAB30
NINA-B302 XPYNINAB30 8595A-NINAB30
NINA-B306 XPYNINAB30 8595A-N INAB30
NINA-B311 XPYNINAB31 8595A-NINAB31
NINA-B312 XPYNINAB31 8595A-NINAB31
NINA-B316 XPYNINAB31 8595A-NINAB31
Table 12: FCC IDs and ISED certification numbers for the NINA-B3 series modules
5.2.2 RF Exposure
NINA-B3 series modules comply with the FCC radiation exposure limits and the requirements of IC
RSS-102 issue 5 radiation exposure limits set forth for an uncontrolled environment.