Ublox NINA-B3 Series, System Integration Manual

Page: 60 / 72

NINA-B3 series - System integration manual
UBX-17056748 - R13 Regulatory information and requirements Page 60 of 72
C1-Public
5.10.1 Antenna accessories
Name U.FL to SMA adapter cable
Connector U.FL and SMA jack (outer thread and pin receptacle)
Impedance 50
Ω
Minimum cable loss 0.5 dB, The cable loss must be above the minimum cable loss to
meet the regulatory requirements. Minimum cable length 100 mm.
Comment The SMA connector can be mounted in a panel. For information
about integrating the U.FL connector, see also the
Reference design
for external antennas (U.FL connector) .
Approval RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
Name U.FL to Reverse Polarity SMA adapter cable
Connector U.FL and Reverse Polarity SMA jack (outer thread and pin)
Impedance 50
Ω
Minimum cable loss 0.5 dB, The cable loss must be above the minimum cable loss to
meet the regulatory requirements. Minimum cable length 100 mm.
Comment
The Reverse Polarity SMA connector can be mounted in a panel. For
information about integrating the U.FL connector, see also the
Reference design for external antennas (U.FL connector) . It is
necessary to follow this reference design to comply with the
NINA-W1 FCC/IC modular approvals.
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
5.10.2 Single band antennas
NINA-B302 and NINA-B312 (u-blox LILY antenna)
Manufacturer ProAnt
Gain +3 dBi
Impedance N/A
Size (HxWxL) 3.0 x 3.8 x 9.9 mm
Type
PIFA
Comment SMD PIFA antenna on NINA-B302 and NINA-B312. Should not be mounted
inside a metal enclosure.
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA
NINA-B306 and NINA-B316
Manufacturer ProAnt
Gain +3 dBi
Impedance N/A
Size (HxWxL) 1.1 x 3.4 x 10 mm
Type
PCB trace
Comment PCB antenna on NINA-B306 and NINA-B316. Should not be mounted inside a
metal enclosure.
Approval FCC, IC, RED, MIC, NCC, KCC, ANATEL, ACMA and ICASA