12.6 Water Valve Operation & Status
Start PAUSE “Only available during
Open/Close operation
Event Action / Status Key Action LED Status Buzzer Status
Start OPEN (Valve in closed position) Short Click 1 time Yellow LED keep blinking
—
Processing --- Yellow LED keep blinking Keep short beep
Success --- Green LED ON 1 second Short beep x 2
Next status (In Network Mode) --- Green LED slow blinking —
Next status (In Standard Mode) --- Yellow LED slow blinking —
Start CLOSE (Valve in open position) Click 1 time Green LED ON 1 second 1” Pulse sound
Processing --- Yellow LED keep blinking Keep short beep
Success --- Green LED ON 1 second Short beep x 2
Next status(In Network Mode) --- Green LED slow blinking ---
Next status (In Standard Mode) --- Yellow LED slow blinking ---
Click 1 time 1” Pulse sound
Processing
-
“In Network Mode”
--- Yellow LED slow blinking
---
Next status – “In Network Mode” --- Green LED keep blinking
---
Processing – “In Standalone Mode” --- Yellow LED keep blinking ---
Next status – “In Standalone Mode”
--- Yellow LED keep blinking
---
Click 1 time Green LED ON 1 second
Short beep x 3
Next Status – Return Open/Close --- Yellow/Green LED blinking Keep short beep
Start Manual Calibration)
--- ---
Processing–Open&Close 1-2 cycles
---
Yellow LED keep blinking
Keep short beep
Next status – “In Network Mode” --- Green LED slow blinking
---
Next status – “In Standalone Mode” --- Yellow LED keep blinking ---
OPEN Valve
Yellow LED ON 1 second
Red LED ON 1 second
CLOSE
Valve
PAUSE
Operation
RESUME
Operation
Manual
Calibration
Start RESUME “Only available
during Open/Close operation
Long hold with 5
beep sounds &
click 5 times
Event Action/Status Key Action LED Status Buzzer Status
Start Water Leak Alarm
--- RED LED fast blinking
Fast beep sound
— RED LED fast blinking Fast beep sound
Alarm Cancellation Green LED blinking 2 times Short beep x 2
Success cancellation --- Green LED blinking 3 times
Short beep x 3
Next Status–“In Mesh Network Mode” --- Green LED slow blinking —
Nest
Status – “In Standalone Mode” --- Yellow LED blinking —
Processing – Close Water
Valve automatically
Long hold with 2
beep sounds
Leak Alarm
Cancellation
Leak Sensor
Probe
Triggered
12.7 Water Leak Alarm Operation & Status
12.8 Patents
Patent 1: US 11,233,501 B1
Patent 2: US 10,995,876 B2
PAGE 7
Ubitech Ltd. Version: 3.0
12.9 Cautions
MOVING PARTS WARNING: Keep hands, hair and all loose articles of clothing away from moving parts. Moving
parts can cause serious Injury. Maintain a safe distance from the product during its operation to eliminate risk of
injury.
POWER SUPPLY WARNING: The power supply is for indoor use only. Only use power supply included with your
product. Do not attempt to repair or use a damaged power supply. Do not immerse the power supply in water or
subject it to physical abuse. Inspect the power supply regularly for cable, plug damage.
CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT: This marking on the product, accessories or literature
indicates that the product and its electronic accessories should not be disposed of with other household waste. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material
resources.
Household users should contact either the retailer where they purchased this product, or their government office, for
details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other wastes for disposal.
This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed
of with other household waste. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66.If batteries are not properly disposed
of, these substances can cause harm to human health or the environment.
SAFE USAGE GUIDELINES: Do not modify or open the product except for battery removal and replacement. Do not
disassemble or attempt to service this product. This product is safe under normal and reasonably foreseeable
misuse operating conditions. Always use both hands while operating the product. This is not a children's product
and is not intended for use by children. Product must be returned to the manufacturer for any service or repair. Long
periods of repetitive motion using the product may be associated with nerve, tendon or muscle injury in your hands,
wrists, arms, shoulders, neck or back. See a qualified health professional for pain, numbness, swelling, burning,
cramping or stiffness.
12.11 Disclaimer
DISCLAIMER
We hereby disclaim that the product is not a substitute for homeowner insurance, customers still need to purchase
relevant insurance, due to installation conditions, environment and other reasons beyond our control, we cannot
guarantee that the product/solution can 100% prevent water leakage damage in all situations, users losses will be
beyond of our liability. Ubitech assumes no responsibility for any errors that may appear in this manual. Information
contained herein and in the set-up guide is subject to change without notice.
Ubitech logo is registered trademark of Ubitech Limited
CUSTOMER SERVICE
If you have any questions, our trained Customer Service Department is happy to assist you 24 hours a day, 7 days a
week. Contact Ubitech Customer Service as follows:
Address: Flat 12, 7/F Block A, Hi-Tech Industrial Centre,
5-21 Pak Tin Par Street, Tsuen Wan, N.T. Hong Kong
Email:
Call: +852-81008500
12.10 Warranty
STATEMENT OF WARRANTY: 1 Year Limited Warranty
Ubitech Limted ("Ubitech”) warrants to the original retail purchaser ("Purchaser”) that the Ubitech (the “Product”)
will be free of defects in materials or workmanship under use for one (1) year from the date of purchase (the
“Warranty period").
For the Purchaser only, if the Product fails to perform as specified during the Warranty Period due to defective parts
or faulty workmanship, Ubitech will repair or replace the defective or damaged parts of the Product. Normal wear
and tear is not covered nor is abnormal use, misuse, mishandling, faulty installation, improper shipping, damage
caused by disasters such as fire, flood or earthquake, neglect, accident or tampering. This warranty covers only
normal use in the United States or Canada.
To obtain warranty service during the Warranty Period, call Ubitech Customer S
-81008500 or email:
852
[email protected] for instructions on sending damaged parts and documentation for a Return Merchandise
Authorization (RMA). Products returned to Ubitech for repair or replacement without authorization will be returned
at the sender's expense. All warranty claims must be accompanied by a legible copy of the original receipt showing
date and details of purchase.
THIS WARRANTY IS NOT TRANSFERABLE, AND, TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW IS IN LIEU OF ALL OTHER WARRANTIES, REPRESENTATIONS AND CONDITIONS, EXPRESSED OR
IMPLIED, STATUTORY OR OTHERWISE, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. NO OTHER PERSON OR
REPRESENTATIVE IS AUTHORIZED TO MAKE ANY OTHER WARRANTY ON BEHALF OF UBITECH OR ASSUME
FOR UBITECH ANY OTHER LIABILITY IN CONNECTION WITH THE SALE OF THIS PRODUCT. IN NO EVENT
WILL CUSTOS BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT,
INCLUDING DAMAGES DUE TO UBITECH'S NEGLIGENCE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO
COUNTRY.
DO NOT RETURN THIS PRODUCT TO THE STORE OR WEBSITE FROM WHICH IT WAS PURCHASED If you
believe the product is defective, has a missing or broken part or are having difficulty with it please contact Ubitech
as listed above for a quick and efficient solution to the problem.
FCC STATEMENT: This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: Reorient or relocate the receiving antenna; increase the separation
between the equipment and the receiver; connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Warning: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your
authority to operate this equipment.
IC STATEMENT: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Contact us if you have any questions
https://www.facebook.com/
g roups/283898176125297
http://www.ubitech.hk
®
®
12.4 Operation Mode
Operation
Mode
Z-Wave
Network
Water Valve
Manual
Operation
Key
Action
Operation Support
Long Short Standalone Network
SmartStart Re-power up the BVS unit --- --- Support Not Support
Classic Inclusion Add into Z-Wave Mesh Network --- 3 Support Not Support
Exclusion Remove from Z-Wave Network — 3 Support Support
OTA Firmware upgrade Over The Air --- --- Not Support Support
Factory Reset Perform Device Reset Locally 10 5 Support Support
Open Control water valve to full open --- 1 Support Support
Close Control water valve to full close --- 1 Support Support
Pause Pause only works during open/close operation --- 1 Support Support
Resume Resume to previous during Pause operation --- 1 Support Support
Auto-calibration Perform calibrate position and torque force 5 5 Support Support
Trigger to close valve Auto close water valve --- 1 Support Support
Alarm Cancellation 2 --- Support Support
Resume to normal operation
mode if no alarm triggered
Water Leak
Alarm
Function
Description
12.5 Network Operation & Status
Event Action / Status Key Action LED Status Buzzer Status
To be ready after Power Okay Event --- Green LED ON 2 seconds 2 beep sounds
Enter SmartStart and Processing --- Yellow LED keep blinking Keep short beep
Success --- Green LED ON 1 second Short beep x 2
Next status --- Green LED slow blinking ---
Start Manual INCLUSION Click 3 times Green LED ON 1 second 1” Pulse sound
Processing --- Yellow LED keep blinking Keep short beep
Success --- Green LED ON 1 second Short beep x 2
Next status --- Green LED slow blinking —
Start EXCLUSION Click 3 times Green LED ON 1 second 1” Pulse sound
Processing --- Yellow LED keep blinking Keep short beep
Success --- Green LED ON 1 second Short beep x 2
Next status --- Green LED slow blinking ---
Start
→
Triggered by Gateway --- Green LED ON 1 second 1” Pulse sound
Processing --- Green & RED LED blinking Keep short beep
Success
→
Waiting SOFT REBOOT --- LED OFF 10 seconds Silence 10 seconds
Next status (Power Okay
→
FINISHED) --- Green LED ON 2 seconds 2” Pulse sound
Start Factory Reset Yellow LED ON 1 second ---
Success --- Green LED ON 2 seconds 2” Pulse sound
Next status
→
Standalone Mode --- Yellow LED keep blinking ---
SmartStart
Long hold with 10
beep sounds&
click 5 times
Manual
Inclusion
Exclusion
Firmware
Upgrade(OTA)
Factory Reset
“Device Reset
Locally”
