PAGE 4
Ubitech Ltd. Version: 3.0
11.10 Configuration CC
Note: No Bulk Support equals
to True. It will return an Application Rejected Request Command
when receiving Configuration Bulk Set or Get (if received without Supervision encapsulation). It
will reset all its configuration parameters if either manually reset to factory default or receives a
Configuration Default Reset Command. It will NOT modify or reset any configuration parameter
when being included or excluded of a Z-Wave network.
User Interface
Parameter No. 0x41 (65)
Name Buzzer
Info Enable / Disable Buzzer
Properties Size 1 Byte Min Value 0x00 (0)
Format Enumerated Max Value 0x01 (1)
Read only False Default Value
0x01 (1)
Altering capabilities False Advanced
False
Description Enable / Disable Built-in Buzzer Sound
Value Function
0x00 (0)
Disable Buzzer
0x01 (1) * Default Value Enable Buzzer
Parameter No. 0x42 (66)
Name LED Brightness Level
Info Configure LED Brightness Level
Properties Size 1 Byte
Min Value 0x00 (0%)
Format Unsigned Integer
Max Value 0x63 (99%)
Read only False Default Value 0x50 (80%)
Altering capabilities False Advanced False
Description Configure Built-in LED Brightness Level
Value Function
0x00 ~ 0x63
0% ~ 99%
Parameter No.
0x43 (67)
Name Touch Keylock Protection
Info Disable / Enable Touch Keylock Protection
Properties Size 1 Byte Min Value 0x00 (0)
Format Enumerated
Max Value 0x01 (1)
Read only False Default Value 0x01(0)
Altering capabilities False Advanced False
Description
Disable / Enable Touch Keylock Protection
Value Function
0x00 (0) * Default Value Disable Keylock Protection
0x01 (1)
Enable Keylock Protection
Notification Report
Parameter No. 0x51 (81)
Name Notification Report Lifeline
Info Configure Notification Report (Bitmask)
Properties Size 1 Byte Min Value 0x00 (0)
Format Bit Field
Max Value
0x0F (15)
Read only False Default Value
0x0D (13)
Altering capabilities False Advanced
False
Description Configure Notification Report in Association Group 1 Lifeline “Set Bit to 0 = Disable, Set Bit to 1 = Enable”
Value Function
Bit 0
Water Valve Open / Close – 0 = Disable / *1 = Enabled
Bit 1 Overheat Detection – *0=Disable / 1=Enable
Bit 2
Freeze Detection – 0=Disable / *1 = Enable
Bit 3
Local Water Leak Sensor Probe Detection – 0=Disable / *1=Enable
Water Valve
Parameter No. 0x11 (17)
Name Inverse Water Valve Report
Info Inverse Switch Binary Report value
Properties Size 1 Byte Min Value 0x00 (0)
Format Enumerated Max Value 0x01 (1)
Read only False Default Value 0x01 (1)
Altering capabilities False Advanced False
Description Inverses Switch Binary Report when Water Valve = 0x00 “Valve doesn’t let the water run through in
Notification and real physical status.”
Value Function
0x00 (0) Disable: 0x00 = does not let water run through, 0xFF = let water run through.
Based on Configuration CC setting 0x12 & 0x13
0x01 (1) * Default Value Enable: 0x00 = let water run through, 0xFF = does not let water run through
Based on Configuration CC setting 0x12 & 0x13
Parameter No. 0x12 (18)
Name Association Group 2 SET Value
Info Valve SET Value when receives 0xFF
Properties Size 1 Byte Min Value 0x00 (0)
Format Enumerated Max Value 0x02 (2)
Read only False Default Value 0x01 (1)
Altering capabilities False Advanced False
Description Configure Association Group 2 Basic Set value when Binary Switch Report = 0xFF *(Related to
Configuration setting 0x11)
Value Function
0x00 (0) Disable Basic Set (Send nothing)
0x01 (1) * Default Value Basic ON (0xFF)
0x02 (2) Basic OFF (0x00)
Parameter No. 0x13 (19)
Name Association Group 2 SET Value
Info Valve SET Value when receives 0x00
Properties
Size 1 Byte Min Value 0x00 (0)
Format Enumerated Max Value 0x02 (2)
Read only False Default Value 0x02 (2)
Altering capabilities False Advanced False
Description Configure Association Group 2 Basic Set value when Binary Switch Report = 0x00 *(Related to Configuration
setting 0x11)
Value Function
0x00 (0) Disable Basic Set (Send nothing)
0x01 (1) Basic ON (0xFF)
0x02 (2) * Default Value Basic OFF (0x00)
