![background image](http://html1.mh-extra.com/html/ubisys/g1/g1_assembly-and-commissioning-instructions_3148612039.webp)
39
Gateway G1
Section 3
| Gateway G1 Configuration
Figure 62
7. Accept the settings by clicking on “OK”. Your PC is now in the same network as the gateway is. Note that
your PC is temporarily not connected to the internet and access to other devices in your network environ-
ment (such as file server, network printer etc.) is temporarily not granted anymore.
8. Configure your gateway as described in section 3.3 “Network Configuration”.
9. After successfully configuring the network settings of your gateway, it should now be available in your exi-
sting network environment. To undo the changes to the network settings of your PC, follow the steps 1 to 5.
In the “Properties of Internet Protocol Version 4 (TCP/IPv4)” window, as in step 5, change the setting to
“Automatically obtain IP address”, if you previously used DHCP or change the values below IP address,
subnet mask and default gateway to the previously noted values, if your PC has used a static address (see
figure 59).
For Mac OS X
1. In the finder, click on the apple icon on the top left and then on “System Preferences…” (see figure 63).
Figure 63
2. A new window opens (see figure 64).
3. In the section “Internet & Wireless Communication”, click on “Network”.
Summary of Contents for G1
Page 1: ...Smart Home Gateway G1 Assembly and commissioning instructions...
Page 4: ...4 Gateway G1 Section 1 General information...
Page 9: ...9 Gateway G1 Section 2 Commissioning...
Page 14: ...14 Gateway G1 Section 3 Gateway G1 Configuration...