![background image](http://html1.mh-extra.com/html/ubisys/g1/g1_assembly-and-commissioning-instructions_3148612027.webp)
27
Gateway G1
Section 3
| Gateway G1 Configuration
To activate the ZigBee OTA Upgrade Server on the gateway, enable the option “Use this gateway to supply the
system with updates” (see figure 35).
Figure 35
Caution:
If you are running several gateways in your network, make sure that only one gateway provides the
updates at any time, so it takes the roles of the ZigBee Over-the-Air (OTA) Upgrade Server.
At the bottom of the update page, you find a list with all components of your Smart Home System that have re-
ported on the update server. If an update is available, it will be shown in the appropriate line of your component.
Figure 36 shows an example of listed components of a test installation.
Figure 36
Delete a component
If you want to remove a component from your list (because the component has been physically removed and
therefore it no longer needs to be displayed in the web interface, for example), click on the paper bucket icon
(see figure 36).
Define update times
You can limit automatic updates to certain time spans. Since some components (such as the universal dimmer
D1) restart after installing an update, and turn off connected components in the meanwhile, an appropriate con-
figuration is recommended (e.g. while you sleep or when being on the road). In addition, it is ensured that your
network is not charged with downloads in the main usage time.
To allow automatic downloads of updates only at specific times, enable the option “Allow update downloads only
at specific times only” and configure appropriate days and time spans by setting check marks and defining times
(see figure 37).
Summary of Contents for G1
Page 1: ...Smart Home Gateway G1 Assembly and commissioning instructions...
Page 4: ...4 Gateway G1 Section 1 General information...
Page 9: ...9 Gateway G1 Section 2 Commissioning...
Page 14: ...14 Gateway G1 Section 3 Gateway G1 Configuration...