Ubisys G1, Assembly And Commissioning Instructions

Page: 38 / 51

38 Gateway G1
Section 3 | Gateway G1 Configuration
Figure 60
5. In the new window “Properties of Internet Protocol Version 4 (TCP/IPv4)”, change “Automatically obtain IP
address” to “Use the following IP address” (see figure 59). If this option is already set, note the values be-
low IP address, subnet mask, default gateway and primary/secondary DNS server in order to restore them
at a later time.
Figure 61
6. Under IP address, enter the address 192.168.0.200, for example. For the subnet mask, enter the value
255.255.255.0, in case this value is not entered automatically.