64
sunMAX
™
Solar User Guide
4 . Using the larger, upper
Flashing
as a guide, ensure that the upper edge of the
Flashing
will sit at least 1" (25 mm)
under the front edge of tiles in the course above . If the
Flashing
does not extend up underneath the course of tiles
above, adjust it along the vertical chalk line until it does .
5 . Mark the location of the second row of
Roof Mounts
by placing a parallel chalk line above the first, using the
following guidelines:
• For portrait configurations, mark 66" (1675 mm) up from the previous chalk line .
• For landscape configurations, mark 40 .13" (1020 mm) up from the previous chalk line .
For additional rows, repeat this step as needed .
40 and 1/8" (1020 mm) Landscape
66" (1675 mm) Portrait
6 . Use a roofing bar, remove the tiles from locations where
Roof Mounts
will be installed .
7 . Clear the mounting surface area of any dirt or debris .
Summary of Contents for sunMAX
Page 1: ...USER GUIDE...
Page 2: ......
Page 6: ...iv sunMAX Solar User Guide...
Page 62: ...56 sunMAX Solar User Guide...
