Ubiquiti sunMAX, User Manual

Page: 7 / 82

1
Chapter 1: Introduction
Chapter 1: Introduction
Overview
sunMAX
™
by Ubiquiti Networks is a grid-tie solar solution that utilizes photovoltaic (PV) cells, or solar panels,
to convert solar energy into alternating current electricity . Using a watertight roof mounting system, sunMAX
offers both portrait and landscape array configurations with easy-to-use software to help you design and
implement a fully customizable solar solution .
The sunMAX solar solution should be deployed by an installer trained and familiar with the safety and
operational procedures of the sunMAX system and all of its components .
The
AC Modules are UL listed to standard 1703 and the mounting hardware is UL listed to standard 2703 .
Please adhere to all applicable codes, required permits, and regulations concerning the installation and
inspection requirements as they pertain to your location .
Safety
The following instructions and safety precautions are in place to ensure proper deployment and
operation of your solar equipment:
• Use only the materials and tools specified in this guide .
• Do not break or modify any of the solar components or use them outside of their intended use .
• Do not sit or stand on the surface of the
AC Modules .
• Install components securely to avoid parts from becoming loose or falling off during the
installation .
• Only work in dry conditions with dry tools .
• Prevent rafters and sheathing from becoming wet .
• Install each
AC Module securely to ensure proper operation and grounding of the array .
• AC Modules are installed on rooftops where there is danger of slipping or falling . Ladders and
scaffolding should be used when climbing onto roofs .
• Do not use chemicals on solar modules when cleaning .
• Do not wear metallic jewelry or any conductive material .
• Do not touch electrical contacts, cables, or wires .