39
Chapter 6: Installation
Trim Cover Installation
With all of the
Mounting Assemblies
now at the same height, install the trim cover by following these steps:
1 . Hook the
Trim Cover
over the top lip of the
Mounting Assemblies
by placing it horizontally across the
mount swivels in row one and rotating it down until it comes to a stop .
2 . The trim covers are sized to fit the
AC Module
edges and should be positioned to support each location
in which the
AC Modules
will be installed . Ensure that each
Trim Cover
is fully seated on the
Mounting
Assemblies
in that row . If more than one
Trim Cover
will be installed, position each additional one side by
side until the front row is complete .
3 . Using the included hardware, attach the endcap plates to both of the open ends of the
Trim Cover
. Align
the holes in the endcap plate with the pre-drilled holes on the ends of the
Trim Cover
and secure it to each
of the sides .
Summary of Contents for sunMAX
Page 1: ...USER GUIDE...
Page 2: ......
Page 6: ...iv sunMAX Solar User Guide...
Page 62: ...56 sunMAX Solar User Guide...
