41
Chapter 6: Installation
• The vertical gap created by the installation of two
Trim Covers
installed side by side .
AC Module Installation
With the
Trim Covers
installed properly, follow these steps to install the
AC Modules
:
1 . Hook the
AC Module
onto the top lip of the
Mounting Assemblies
in row one and lower it approximately
45˚ while pulling back slightly on the
AC Module
.
Note:
The remaining roof mount locations should not have
Mounting Assemblies
installed yet .
Trim Cover
AC Module
Mounting Assembly
2 . Holding the
AC Module
at a 45˚ angle, hook the
Mounting Assembly
into the edge of the frame, ensuring
the arrow is facing forward . Line up the mounting base over the
Roof Mount
as you lower the
AC Module
.
Note:
If the
AC Module
will sit on more than one
Mounting Assembly
or
Connector Mount
, ensure
that each component is inserted into the top edge of the
AC Module
before securing it to the
roof mounts .
Summary of Contents for sunMAX
Page 1: ...USER GUIDE...
Page 2: ......
Page 6: ...iv sunMAX Solar User Guide...
Page 62: ...56 sunMAX Solar User Guide...
