![background image](http://html.mh-extra.com/html/add-on/ds-1050/ds-1050_quick-start-manual_2848521001.webp)
This quick guide will help you go through installation quickly
The colour and the appearance may differ depending on the
product, and the specifications are subject to change without
prior notice to improve the performance.
Panel PC DS-1050
QUICK START GUIDE
QUICK START GUIDE
Add-On Products
Roms Hule 8, 7100 Vejle, Denmark
Europe Tel: +45 7944 7000
North America Tel: +1 (905) 655-9262
CARE AND WARNING
WARNING:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/panel PC technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,including interference that may
cause undesired operation.
Correct Disposal of this product. This marking indicates that this product should
not be disposed with other household wastes throughout the EU. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental safe recycling.
The power consumption of the product in networked standby is 5.7W which all wired
network ports are connected and all wireless network ports are activated.
“ FCC & CE RF Radiation Exposure Statement Caution: To maintain compliance with
the FCC & CE’s RF exposure guidelines, place the product at least 20cm from near by
persons. ”
Adaptor with ferrite must be used with this equipment to ensure
compliance with the Class B FCC limits.
Power Adapter information:
Model No.: KSASB0241200150D5
INPUT: 100-240V~50/60Hz 0.6A
OUTPUT: 12V 1.5A
QUICK START GUIDE
D
QUICK START GUIDE
P R O D U C T S