59
UBI EasyCoder 501 – Technical Manual
Self-Adhesive Labels
PAPER DIMENSIONS, cont'd.
←
a
→
Web Width
(including backing paper):
Maximum .................................................. :
120.0 mm
(4.72")
Minimum ................................................... :
25.4 mm
(1.00")
←
b
→
Backing Paper
The backing paper must not extend more than a total of 1.6 mm (0.06")
outside the paper and should protrude equally on both sides.
Minimum transparency: 40% (DIN 53147).
←
c
→
Label Width
(excluding backing paper):
Maximum .................................................. :
118.4 mm
(4.66")
Minimum ................................................... :
23.8 mm
(0.94")
←
d
→
Label Length:
Max. label length (8 dots/mm)
1
.................. :
1875 mm
(73.8")
Max. label length (11.81 dots/mm)
1
........... :
1250 mm
(49.2")
Min. label length (all) ................................. :
10 mm
(0.39")
Max. printable length (8 dots/mm) ............. :
1250 mm
(49.2")
Max. printable length (11.81 dots/mm) ...... :
833 mm
(32.8")
←
e
→
Label Gap:
Maximum .................................................. :
10.0 mm
(0.39")
Recommended ........................................... :
1.6 mm
(0.06")
Minimum ................................................... :
1.2 mm
(0.05")
The adjustable label stop sensor must be able to detect the extreme front and
rear edges of the labels. Therefore, do not use larger inner corner radii than
can be compensated for by adjusting the sensor's position, i.e.
≈
50 mm
(1.97").
1
/. The last third of a label with
maximum length cannot be used for
printing! Also see “Max. printable
length”.
a
b
c
e
SELF-ADHESIVE
LABELS
b
d
PAPER FEED
DIRECTION
