5
-
Replace the cover.
Safety Features
1. This heater has an audible alarm to warn that parts of the heater are getting excessively hot. If the
alarm sounds, immediately turn the heater off and inspect for any objects on or adjacent to the
heater that may cause high temperature.
DO NOT OPERATE THE HEATER WITH THE ALARM SOUNDING.
2. A thermal overload protector is built-in to prevent overheating.
3. When an overheat temperature is reached, the heater will be automatically shut off. It can only
resume its operation when the user resets the unit. (See
RESET INSTRUCTIONS
below)
Reset Instructions
1. Unplug the heater and wait 5-10 minutes for the unit to cool down.
2. After 5-10 minutes, plug the unit in again and operate normally.
Troubleshooting tips
If your heater shuts off unexpectedly or fails to operate, one of the above-mentioned safety features
may have been activated to prevent overheating.
1. Be sure the power cord is plugged into a working electrical outlet.
2. Check your thermostat setting. The heater may be off because it has reached the desired
temperature setting.
Maintenance
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. DO NOT
IMMERSE HEATER IN WATER!
CLEANING:
IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clean the heater grills with the
vacuum brush attachment on your vacuum cleaner. This will remove lint and dirt from the inside of the
heater. DO NOT ATTEMPT TO TAKE HEATER APART. Clean the body of heater with a soft cloth.
CAUTION: Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage the
heater. NEVER USE ALCOHOL OR SOLVENTS.
STORAGE:
Store the heater with these instructions in the original carton in a cool, dry place.
