2
Product Appearance
Figure1
A. Power on/off button
B. +/- Adjustment buttons
C. °C/ºF, on/off button
D. Timer setting button
E.
Mode setting button
F. LED Display
G. Power indicator light
H. Filter
I. Back cover
J. Exhaust opening
K. Handle
L. Air intakes
General Safety Information
When using electrical appliances, basic precautions should always be followed to reduce the risk of
fire, electric shock and personal injury, including the following:
1. Read all instructions before using this heater.
2. Use this heater only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electrical shock, or personal injury.
3. Make certain that the power source complies with the electrical requirements of the heater.
4. Extreme caution is necessary when any heater is used by or near children or invalids and
whenever the heater is left operating & unattended.
5. The appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug of heater
does not fit fully in the outlet, contact a qualified electrician. Do not attempt to defeat this safety
feature.
6. Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings.
Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it
will not be tripped over.
7. Do not operate any heater with a damaged cord or plug, or after the heater malfunctions, has
been dropped or damaged in any manner. Return heater to authorized service facility for
examination, electrical or mechanical adjustment or repair.
8. Unplug power cord before servicing or moving the heater. Always unplug heater when not in use.
WARNING: DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF
DISCONNECTING POWER WHEN SERVICING OR MOVING THE HEATER. ALWAYS UNPLUG
THE POWER CORD.
