Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
11
2
Installing the DVW3201B
This chapter explains how to set up and connect the DVW3201B, connect additional
devices, and troubleshoot the installation.
Topics
See the following topics:
Setting Up and Connecting the DVW3201B on page 11
Connecting Devices to the Network on page 12
Troubleshooting the Installation on page 14
2.1
Setting Up and Connecting the DVW3201B
Use the following instructions to set up and connect the DVW3201B. When the device is
set up and connected, refer to
Accessing the Web Interface on page 17
to configure the
device.
Important
: Subscribers contact your service provider to enable Internet access, wireless
networking, and telephony (voice). In particular, voice service requires additional steps for
the service provider including cancelling the previous telephone provider service, porting
the telephone number, and other tasks to minimize downtime during the transition.
Typically, the service provider initially configures and connects the device. The installation
steps are provided below if you wish to confirm the setup, or add devices to your network.
Refer to
Connecting Devices to the Network on page 12
.
Steps
To set up the device:
1. Remove the contents from the device packaging.
2. Place the DVW3201B in the best location to connect to other devices, such as PCs or
gaming consoles.
Place the wireless cable modem and wireless clients in open areas far away from
transformers, heavy-duty motors, microwave ovens, refrigerators, fluorescent
lights, and other manufacturing equipment. These items can impact wireless
signals. A wireless signal can become weaker after it has passed through metal,
concrete, brick, walls, or floors.
Place the device in a location that has an operating temperature of 0
˚
C to
40
˚
C (32
˚
F to 104
˚
F). Refer to
Understanding Safety and Regulatory Information
on page 2
for more safety information.