Understanding Default Values and Logins
Ubee Interactive
8
Ubee DVW3201B Advanced Wireless Voice Gateway Subscriber User Guide • July 2012
1.7
Understanding Default Values and Logins
The DVW3201B is pre-configured with the following parameters. Some regions may
change default values using the cable modem or XML configuration file. Check with your
provisioning team to determine the default values for your region.
Local Port Address
: 192.168.100.1, Web Interface: http://192.168.100.1
Operation Mode
: NAT Mode
Subnet Mask
: 255.255.255.0
Wireless Defaults:
Primary SSID (subscriber-managed) = DVW3201B plus last 2 characters of the
cable modem’s MAC address with upper letters entered in upper case.
Example:
DVW3201BE3
Note:
If the subscriber changes the SSID, the device does not revert to this default
SSID when the device is reset, except when a manual reset is performed
through the Web UI (see
Understanding the Tools Menu on page 81
).
The MAC address can be found on the device label or it can be found by
opening an Internet browser window to the device. Refer to
Using the
Information Option on page 21
for instructions.
Encryption Method =
WPA2-PSK
with
AES
encryption
WPA Pre-shared Key = DVW3201B plus the last 6 characters (3 octets) of the
cable modem’s MAC address (UPPER case, if letters).
Example:
DVW3201B9822E3
WPS PIN = Randomly generated eight digit number
Device Name:
UbeeAP
Standard User Web Interface Login
:
Username:
user
Password:
user
1.8
Understanding LED Operations
The following section describes what the device LEDs indicate.
1.8.1
Understanding the Device Front Panel
The following image represents the front panel of the device. LED descriptions are
provided in the following table.
