SKU 97706
For technical questions, please call 1-800-444-3353.
PAGE 6
TYPICaL HOOK-UPS
Note:
Prior to using this product, make sure to read and understand all instructions and
safety precautions as outlined in the vehicle manufacturer’s manual.
GM Multi-Port And Chrysler Multi-Port - FIGURE A:
gaUgE
(1)
PRESSURE TESTINg
aND
BLEED-OFF aSSY.
(25)
aDaPTER
(27)
FIgURE a
1.
Turn off ignition.
Relieve the fuel pressure. Refer to the vehicle’s service manual for specific pres
-
2.
sure relief procedures.
Connect the Gauge (1) to the Pressure Testing and Bleed-off Assembly (25).
3.
Remove the protective cap from test fitting on vehicle.
4.
Attach the swivel female fitting on the Adapter (27) to the test fitting on the ve
-
5.
hicle. Hand tighten.
Attach the female quick coupler on the Pressure Testing and Bleed-off Assembly
6.
(25) to the male quick connector on the Adapter (27).
Start the engine and allow it to idle. Check for leaks.
7.
Read the Gauge (1) and compare result with the pressure in service manual.
8.
Stop engine and turn ignition OFF.
9.
With free end of Bleed-off Hose in suitable container, press the Button on side of
10.
bleed-off assembly slowly to de-pressurize the fuel system.
Refer to the
11.
General Safety Rules
section before removing Tester from vehicle.
Replace the protective cap onto the test fitting on vehicle. Check for leaks.
12.
REV 07f, 07i
