SKU 66804
For technical questions, please call 1-800-444-3353.
Page 2
SaVe thiS manual
Keep this manual for the safety
warnings and precautions, assembly,
operating, inspection, maintenance and
cleaning procedures. Write the product’s
serial number in the back of the manual
near the assembly diagram (or month and
year of purchase if product has no num-
ber). Keep this manual and the receipt in
a safe and dry place for future reference.
important SaFetY
inFormation
in this manual, on the labeling,
and all other information
provided with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
follow this symbol to avoid
possible injury or death.
Danger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
Warning indicates
a hazardous
situation which, if not
avoided, could result in death
or serious injury.
caution, used
with the safety alert
symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
notice is used to
address practices
not related to personal injury.
caution, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general Safety rules
Warning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future
reference.
Electrical shock can cause death
1.
or injury! NEVER TOUCH exposed
conductors of electricity.
Inspect the Test Light/Voltmeter
2.
before use. In addition to a general
inspection be sure to:
Pay special attention to the insula-
a.
tion protecting the connectors.
Check the leads for exposed metal,
b.
damaged insulation, and continuity.
Replace damaged test lead imme-
c.
diately before use or storage
Do not use the Test Light/Voltmeter if:
3.
The test lead is damaged in any
a.
way.
Near any explosive gasses or
b.
fumes.
Any abnormal operation is de-
c.
tected.
Use caution when working near volt-
4.
ages above 48 VDC. Voltages this
high present a risk of electric shock.
Connect in parallel with circuit.
5.
